Testing Smoke Alarms
As each property in Western Australia becomes compliant with the smoke alarm legislation, it is imperative that each property have these devices tested on a regular basis. Smoke alarms are not failsafe and it is recommended that testing occurs at monthly intervals. This is critical in knowing that these life saving devices will work as they should in a time of need.
In the event of a failure of the device, this monthly testing will ensure that the problem is detected and rectified quickly to prevent potential death or damage to the property and possessions.
The way to test your smoke alarms is by manually pushing the 'Test' button on each smoke alarm. This is a mechanical override button to the siren. If a siren isn't heard, then the smoke alarm will need to be replaced.
We recommend an annual test of the smoke alarm performed by an electrician. Through working closely with FESA, we have devised a Smoke Alarm Service Package - SASP. This package has been carefully designed to ensure your smoke alarm works effectively in the event of a life threatening situation.
There are 6 key elements to ensure your smoke alarm is working effectively:
- Test the smoke alarm using artificial smoke spray and ensure the siren sounds
- Replace the battery and ensure terminals are corrosion free
- Check and monitor smoke alarm/s for expiry date
- Making sure the smoke alarm is free of physical damage and unblock sensor vents (to be free of dust, debris and insects)
- Making sure the smoke alarm is secured to the ceiling or wall
- Provide a written certificate of compliance after each inspection
Call us now on 1300 GO FUSION (46 3874) or visit our contact page.